Trex 450 flight ready!

I moved the MSH Brain FC from my crashed 550 (which will be getting a Vbar Neo with Rescue), to my 450. I originally planned I put it in my 250, but it didn't fit between the frames. So I moved the 3gx FC on the 450 to the 250, and the Brain from the 550 to the 450. 

It took me all day Sunday to figure out how to correctly calibrate the Brain and set it up for the 450!  The elevator channel didn't want to calibrate.  It took me all day, breaks, and several attempts to figure out what was going on. The elevator servo needed to be reversed to move in the correct direction, but the endpoints in the software didn't reverse with it. So I was moving the stick in the opposite direction I needed to set the endpoint!  What I needed to do was set the endpoints 1st, then reverse the channel, then fine tune the endpoints by moving the stick one way check the endpoints but adjust it by moving it the opposite direction. Geez. 

Once I got that part sorted out, the rest of the setup went quickly thanks to my Soko kit and Brain setup wizard. 

The 450 is flight ready for some tuning, once the rain stops. In the meantime I need to get the 380 fixed.