130x repaired!

I swapped out the dead front servo in my 130x last night, as I wanted to get it flying again so I can practice inverted hovering.  I needed to take the frame apart to get the front servo out, which was a pain. Once I got it out I found out why it quit working. A chip had come loose from the PCB and must have been barely hanging on, since it fell out when I removed the servo!

The 130x after I got the front servo out. 

I took a few tries to reassemble the frame and get everything in the right spot, but once I did, it screwed back together easily.  I powered it up and everything worked as it should. Hopefully it still flies ok, since I really can't check the head setup. Lol.