I got stuck during the build at the speed control install as I wasn't sure if I wanted to use the quick change battery kit I got or regular connectors. The 2600mah batteries I have are a tight fit on the battery tray and I needed to figure out how to wire the connector. After a few days of messing around with placement of the battery and routing of the wires, and figuring out how long to cut them, I came with a method to install the battery onto the tray :)
I used a big wire tie and double sided tape to secure the battery on the tray.
Leveling the swash plate and setting the blade pitch was easy, but centering the tail pitch hub was a pain! I tried different horn positions, ball link holes, and adjusted the tail rod length to get the correct servo throws!
I was finally done with the setup after l was happy with the tail :). Onto the maiden flight!
No comments:
Post a Comment